Corollary equipment

1. Smelting workshop equipped with 2 sets of 5-8 tons cupola, 1 set of 5-10 tons of intermediate frequency induction smelting furnace for refining. Workshop equipped with 100T, 50T,30T and various kinds of Metallurgy crane. The advanced technology of production resin sand and 2 assembly lines of 10 tons old sand for recycling. Old sand all adopt the trench conveying, focus on closed processing, do recycle and save energy.

2. Cleaning workshop covers area of 1000 square meters. The main equipment are drawing furnace, shot-blasting machine and various cleaning equipment.

3. Mould workshop covers an area of more than 10000 square meters, and mainly manufacture various moulds.

4. Processing workshop covers an area of 2000 square meters. The main equipment is large and medium-sized CNC machining center. Be used for large machinery processing etc. Mode of production flexibility, can satisfy the different requirements of customers. At the same time the company equipped with perfect testing equipment, including mechanical properties test, metallographic detection, Spectrum detection and non-destructive detection equipment. To provide quality products to our customers have made a guarantee.

Test facility list

1. Direct-Reading Spectrometer(F20)

Use:Test the chemical composition of material.

2. Tension Tester(WEW-600)

Use:Test mechanical properties of material including: tensile strength, yield strength, elongation rate, shrinkage rate.

3. Impact Test Machine(JB-300)

Use:Test the impact physical property of material.

4. Low temperature Chamber For Impact Specimen (CDW-60)

Use:Used to low down the temperature of specimen for impact test.

5. Tensile sample scale distance instrument

Use:Test the elongation rate of the material.

6. Hardness Test machine(HB-3000)

Use:Test the Brinell hardness of material.

7. Portable Harder Tester

Use:Test the Brinell hardness of material.

8. Metallographic Microscope(4XB,4XC)

Use:Analyse Metallographic structure of material.

9. Polisher

Use:Polish the surface of the metallographic testing samples.

10. Ultrasonic Testing Machine(PXUT-27)

Use:Inspect the internal defects(shrinkage,porosity).

Scroll to Top